-
14-09-2009, 20:05 #1
GUIDE : hoe download/activeer je skins : GUIDE
Skins installeren/activeren op counter strike source doe je zo :
Ik zal u het installeren/activeren van skins aanleren.
Eerst downloaden u de skin.
website skins downloaden : FPSBANANA > Skins > CS:S
Zoals u ziet op dat het bestand heeft de extensie ".rar". WinZip ondersteunt geen rar-bestanden. Voor toegang tot rar-bestanden die te verkrijgen, moet u WinRAR downloaden.
Nadat WinRAR is geïnstalleerd, opent u het bestand.
Nu gaan we de mappen bekijken.
materialen: dit bevat de structuren voor de wapen. Zonder deze beschikt u over een roze en zwart pistool op zoek.
modellen: skins voor modellen
wapens: skins voor wapens
v_models: skins voor wapens in de weergave van de eerste persoon
w_models: (dit verschijnt niet voortdurend) skins voor de wapens in de weergave van de wereld
modellen: dit bevat het model voor een wapen. Zonder werkt de skin niet.
wapens: map met de modellen voor wapens
scripts: dit aangegeven waar het geluid van elke gebeurtenis (opnieuw laden, ...) gaat.
wapens: scripts voor wapens geluid
geluiden: dit bevat de geluiden voor het wapen
wapens: geluiden voor wapens
[naam van de wapen]: geluiden voor dit bepaalde wapen
Opmerking: Het is normaal dat sommige mappen worden niet weer gegeven in andere weergaven
te downloaden. (Bij voorbeeld wanneer u open te stellen een andere skin ziet u alleen de materialen en modellen)
De volgende procedure (stap 6 en 14) werkt voor elke weergave die biedt een combinatie van deze mappen weer geven: materialen als model voor geluids scripts
Dat betekent dat u kunt deze procedure voor elke skin die u downloadt, zolang het correct is verzonden.
Ga naar start > uitvoeren (On Vista is het Windows-toets + R)
C:\ Program Files \ Files\Valve\Steam\SteamApps\ invoeren en klik op OK. Als u de volgende drie stappen overslaan wilt, probeer % sourcesdk % plaatsen\..\counter-Strike source\cstrike in plaats daarvan.
De bovenstaande map mogelijk anders voor u.
Selecteer de map met uw e-mailadres/gebruikers naam de counter-strike bronmap selecteren de cstrike map nu terug te keren naar WinRAR selecteren
Selecteer alle mappen
Nu slepen en neerzetten van de mappen in de map cstrike (Zorg ervoor dat de aanwijzer op het witte gedeelte van het venster cstrike wanneer u de muisknop loslaat en u Ja alle selecteert) nu is u skin geïnstalleerd! Ga spelen op counter-strike source en genieten!
Voor de Player-weergaven
Een skin T/CT downloaden
Open met WinRAR
Ziet u enkele bestanden vtf
Ga naar C:\ Program Files \ Files\Valve\Steam\SteamApps\Counter Strike bron \cstrike\materials\models\player\
De bovenstaande map mogelijk anders voor u.
Deze mappen maken: ct_gign ct_gsg9 ct_sas ct_urban t_arctic t_guerilla t_leet & t_phoenix
Als de bestanden in de rar-bestand wordt gestart met ct_urban, slepen en neerzetten van alle bestanden in de map "ct_urban". Als de bestanden wordt gestart met t_phoenix, slepen en neerzetten van alle bestanden in de map t_phoenix. Hetzelfde concept geldt voor de andere terroristische & Counter-Terrorist skins.
Scopes
Als u met een scope_lens.vtf wanneer u een scope hebt gedownload, moet u deze uitpakken in ...\counter-strike source\cstrike\materials\overlays\
Hebt u alleen een map materialen, slepen en neerzetten van de map met materialen naar de achtergrond van de map cstrike. (\counter-strike source\cstrike\)
De materiële bestand bevindt zich in cstrike\materials\overlays\scope_lens.vtf
Voor houders
Als u met een rar-bestand dat de titel van de introductie alleen weer gegeven wanneer u het opent, dubbel klik op deze map en selecteer de materialen (en modellen, indien van toepassing) mappen en sleep deze naar de achtergrond van de map cstrike. Ja, u alle overschreven.
De houders worden opgeslagen in cstrike\materials\models\shells\. Gaan we bekijken de mappen in de houders.
a. 12gauge - voor geweer
b. 338mag - voor awp
c. 556 - voor geweren voornamelijk (enkele zijn m4a1, m249, galil)
d. 57 - voor p90
e. 762nato - voor geweer ak47 (misschien anderen)
f. 9 mm - glock18, mp5navy (misschien anderen)
Er is ook een speciale map voor de deagle shell. Het is opgeslagen in materials\models\v_models\pist_deagle\ en bullet.vtf wordt genoemd.
Voor hand schoenen/hoesjes
De structuur van handen/hand schoenen is cstrike\materials\models\weapons\v_models\hands\v_ hands.vtf
Flitsers
Het flitser bestand bevindt zich in ...\cstrike\materials\effects\ en flashlight001.vtf wordt genoemd.
Mondings Flash
Het mondings flash-bestand bevindt zich in ...\cstrike\materials\effects\ en muzzleflashx.vtf wordt genoemd.
Hopelijk heeft u het iets bijgebracht,
tot in counter strike !no votes
-
-
14-09-2009, 20:08 #2
Intro
This is my tutorial on basic movie making, as well as more to do with the more advanced things. If you do not have time, DO NOT BOTHER with this tutorial. It is very time consuming, and if you don't have the time to learn this, then you will not have the time to learn Source Recorder and sony vegas. It requires a lot of disk space, not at the beginning, but if you are like me, i only have about 65 gb of freespace left on my harddrive. While I am writing this tutorial, I would like to say that I am planning to get a TerraBite (however you spell it) harddrive (1000gb) because movie making, the RIGHT way for counterstrike source for the best quality, best slow motion, and best renders, is it saves as a file called ".avi" and the .avi ends up to be about 25gb per maybe 2 minutes of recording with a high framerate which we will get into later. But get a big hard drive or you will be HURTING by the time you try to record too many videos and run out of disk space. I will reference to my videos throughout the tutorial, and they would be very very useful, they are examples.
Things You Need: (*'s Mean It Is REQUIRED!!!)
*Sony Vegas 8+ (I use 9)
*Counter-Strike Source (or any game with the source engine)
*Virtual Dub (For putting all of the tga files together to make the actual movie)
*ClayMan's Movie Config (Sets up CS:S to the EXACT settings used for movie making including the correct resolution, crosshair size, removes hud, removes skins (momentarly until you delete the cfg) and makes CS:S as HD as it gets
-Any additional software for sound, and for the future for cool effects, using adobe after effects. Also photoshop or a good editing program for picture files) And/or Goldwave (freeware)
Links to the free stuff:
-Goldwave : GoldWave - Audio Editor, Recorder, Converter, Restoration, & Analysis Software
-Clayman Movie Making GUI : Infected Productions - "Let it infect you" (JUST an FYI, It says "Download Rechyyy Moviemaking GUI now"...That is the correct download.
-Virtual Dub : Download VirtualDub from SourceForge.net
Part I - The Downloading And Setting Up.
The first thing you need to do, is download all three of the programs, and install them. Clayman's Movie Config is just basic extracting that you should know by now, and if you don't go find out or you will have a LOT of problems with this. So, extract claymans movie config to your cstrike folder. Next thing you need to do is test if it works. When you launch counterstrike the resolution should 'fit to screen' and it should run in a window. If it doesn't do that, you extracted wrong, and need to retry it.
Second, download Virtual Dub, check the link section of the tutorial. Install it, and do not launch it (unless you absolutely must test it). This is a MUST HAVE program. You won't need it for a while.
Third, have Sony Vegas installed, no need to know anything about it just yet, that is where the advanced part of this tutorial comes in. Have it installed and ready for launch.
Part II - Getting Ready For Recording
To begin let me brief everyone on how source recorder works. When you type "host_framerate ###" in console, what it does, is it makes it record MORE frames the higher the number. This is good for only if you are going to use slow motion. If you don't want to use ANY slow motion, then use host_Framerate 30, but if you want to do nice, smooth slow motion, then you take the number higher. "http://www.youtube.com/watch?v=P40l4b1DH0w" That is one of my videos, watch how smooth the slow motion is right after the shot. I used host_framerate 2000 for that video, and you can go up to as far as you want, although in my opinion, any slower than what i did in that video is overkill. So, experiment with the framerate throughout your editing. For this tutorial, we will use host_Framerate 250. So, open console, type playdemo (name of the demo), and it should start up. Then press Shift+F2, and a menu will popup. Mess around with the menu, main thing you need is fast forward, pause, and play. So find where you want to record, hit pause, and type this exactly in console. "host_framerate 250". Now, you want to hit enter, and you don't want to get out of the menu just yet. Stay in console, and type in "startmovie (name you want your demo). It is now recording. You need to get out of the console, and hit play IMMEDIATELY. Hit play, and the second it starts playing, exit out of the window. Now, this is where we get to be patient. The higher the framerate you used (host_framerate), the slower it will record, so it can capture more frames. So, 250 you shouldn't have a problem. For a real time clip that is say 15 seconds long, recording with host_framerate 250 should take around 3-5 minutes. If the clip is 15 seconds long, and you use say 1500, it will take around 15-25 minutes. Now, while you are recording watch the speed, and to stop the record when you are done, type in the console, "endmovie". Now it will freeze for a second, don't freak out, just wait. You are now done with the most complicated part of the entire process.
Part III - Virtual Dubbing Your Video
Exit counter-strike: source. Open up your cstrike folder, and if all went as planned, you should have a SHIT ton of files with the file type as ".tga". Yes, there are a LOT of them. It takes up a lot of space as I said, but don't worry. Open up Virtual Dub, you should have it installed. Open it up, and go to "Open Video File". First thing you do, is go to your cstrike, and you can see all of the .tga files. The .tga files will have the name you typed in when you put in "startmovie (what you want to call it). Example: I type in "startmovie tut1" I will have tga files with tut10000.tga...tut10001.tga...and so on. So, click on the one that says "tut10001" and hit open. Now if you look at the bottom of virtual dub, you should see that you have a timeline. If all went as planned, you can drag the timeline, and see what you just recorded. If your 8 years old, have fun with that xD, and if you want to get the job done, here is the next and MOST IMPORTANT PART of Virtual Dub. Go up to Video, in the "file menu area". You should see a lot of things bubbled in. The one we need is "change framerate to" then it has a bunch of blanks after it. (Refer to Screenshot!) Click the bubble, and this is VERY important. The framerate we used was 250, correct? Whatever the framerate you used, in the box, you put half of the host_framerate you used. So, we used 250, so half of 250, is 125. Put in the box 125. Hit OK, and then go to file, and Save As AVI. It will come up with a little menu (Refer to screenshot!) and you can see how many frames there are, how much time is left, etc... What this is doing, is all of those .tga files, with the same name "tut1", it is putting all of those together, kind of like a cartoon flipbook, you flip the pages and if made correctly, you get a little animation. Same concept, putting all of them together, and saving as a .avi. When complete, the little window will disappear. Just hit X. Now if you look in the place you saved it, you should have a .avi. Now, IF YOU HAVE the avi file, just go to your cstrike and delete all of those nasty tga files, and you should have a LOT of diskspace saved. You are doing good so far. Now, part IV.
Thanks for checking this out, it is my first tutorial on movie making, and if you liked it the only way I can think about to thank me (not meaning to sound greedy) and you don't have to but I'd love for you to subscribe, comment, and rate my videos. You can check out my channel at : YouTube - Foxx249's Channel.
Questions, comments, need help, or just want to be friends? Here's my contact info!!!
Steam: projektmayhem81
Youtube: YouTube - Foxx249's Channel
Email: samuallarson@gmail.com (not a good way to contact me I never check it and it's my junk mail thing but i will see eventually although i recommend the other 2 options.
FPSB: [F]ox
Advanced Part Coming Soon!!!
Within the week after I release this tutorial, I will make Part II of my tutorial with working on Sony Vegas!!! It will include: Cutting, Pan Crop, Adding Sound, Sync, Adding Effects, and More!!!no votes
-
14-09-2009, 21:51 #3
Graag wat meer kleur en opmaak.
no votes
-
14-09-2009, 22:03 #4no votes
-
14-09-2009, 22:24 #5Member
- Registered
- 28/11/04
- Posts
- 924
- iTrader
- 0
- Mentioned
- 0 Post(s)
Hopelijk voor u komt da nederlands door ne vertaalsite, anders is dit wel vrij zielig.
<i8b4uUnderground> d-_-b
<BonyNoMore> how u make that inverted b?
<BonyNoMore> wait
<BonyNoMore> never mindno votes
-
14-09-2009, 23:57 #6Member
- Registered
- 25/03/07
- Posts
- 1,890
- iTrader
- 0
- Mentioned
- 0 Post(s)
haha wie the fuck gebruikt er nog skins?
gtfo my forumz shitterSystem Specs: http://specs.tweak.to/17324
broKen » YNNCK: as die ier int stad dichtbij woont slagek die zenne pc kapot
hyp: hahahahhaano votes
-
15-09-2009, 00:22 #7no votes
-
15-09-2009, 07:01 #8no votes
-
15-09-2009, 08:22 #9Member
- Registered
- 12/08/08
- Location
- Antwerpen
- Posts
- 1,971
- iTrader
- -1 (0%)
- Mentioned
- 0 Post(s)
- Reputation
- 1/55
http://www.youtube.com/user/Dubstepher0#p/u
DubDubDubDubno votes
-
15-09-2009, 11:06 #10Member
- Registered
- 25/03/07
- Posts
- 1,890
- iTrader
- 0
- Mentioned
- 0 Post(s)
System Specs: http://specs.tweak.to/17324
broKen » YNNCK: as die ier int stad dichtbij woont slagek die zenne pc kapot
hyp: hahahahhaano votes
-
24-09-2009, 00:00 #11
Zijn skins dan legaal? er werd me altijd verteld dat het illegal was ze te gebruiken? :O
Klik Hier om geld te verdienen zoals ik!
no votes
-
24-09-2009, 00:02 #12Member
- Registered
- 11/07/09
- Location
- t stad
- Posts
- 424
- iTrader
- 0
- Mentioned
- 0 Post(s)
no votes
-
24-09-2009, 00:03 #13Member
- Registered
- 18/07/05
- Posts
- 264
- iTrader
- 2 (75%)
- Mentioned
- 0 Post(s)
no votes
-
24-09-2009, 00:04 #14Member
- Registered
- 21/02/06
- Location
- Leuven > SJW
- Posts
- 581
- iTrader
- 5 (100%)
- Mentioned
- 0 Post(s)
- Reputation
- 3/3
ge kunt er ni voor gevacced worden ma meeste servers hebben zblock en/of sv_pure 2 wat het totaal blokked.
En dan krijg ik het van die shitpubs waar die admins en zblock en dan nog is 1000 models op smijten, en te dom zijn om die deraf te halen.7zp ftw!!!no votes
-
24-09-2009, 00:39 #15Member
- Registered
- 25/03/07
- Posts
- 1,890
- iTrader
- 0
- Mentioned
- 0 Post(s)
haha gij speelt op pub
System Specs: http://specs.tweak.to/17324
broKen » YNNCK: as die ier int stad dichtbij woont slagek die zenne pc kapot
hyp: hahahahhaano votes

